We don't compromise on safety. All of our explosion proof models are certified by a nationally recognized test laboratory (ETL).
SOL XP Series bench top ultrasonic cleaners are fast, efficient and safe to use with flammable solvents such as isopropyl alcohol or acetone in the tank. Our table-top units provide the ultrasonic power density of the largest industrial systems. Fully nitrogen inerted for fire protection. Designed for use in Class I Division 1 hazardous areas.
Using SOL XP with flammable solvents requires proper installation, ventilation, grounding, and EHS compliance. Improper setup can pose serious safety hazards. We strongly recommend calling us before installation to ensure your system is configured correctly and safely for your application.
Contact us for setup guidance →Electrical panel and generator are located outside the hazardous duty area. When this is not possible, an explosion-proof purged panel can be installed.
Nitrogen purged transducer enclosure and intrinsically safe circuits with interlocks contribute to safety compliance.
Containment pan for spills, cooling jacket to reduce solvent evaporation and extend ultrasonic run time, and solvent purification system.
Degreasing, refurb, and turnaround cleaning where flammable solvents are specified.
Parts requiring solvent cleaning before coating, bonding, or assembly.
MRO cells that need repeatable solvent cleaning with controls that satisfy safety audits.
Choose SOL XP when parts are too large for 1-liter beakers, solvent volumes are larger, throughput is higher, or your safety program requires explosion-proof certification.
Yes. The SOL XP is not a closed system and will release solvent vapor into the air. A suitable exhaust system is a necessity.
System includes electrostatic discharge (ESD) ground strap hookup. Periodically check ground straps for loose connections or breakage. Caution: ALWAYS CONNECT A WRIST STRAP TO THE GROUND PLUG BEFORE OPENING INNER LID AND PLACING PARTS IN THE MACHINE.
System has been approved for use with isopropyl alcohol (IPA), ethanol, and acetone.
We can provide installation guidance and a process checklist; contact us for application-specific SOL XP support.
Yes, specify Canadian NRTL certification when placing order.
Tell us your solvent system, contamination type, and process requirements. We'll confirm the right Sol XP configuration for your application.
There are no products listed under this category.
SOL XP Series bench top ultrasonic cleaners are fast, efficient and safe to use with flammable solvents such as isopropyl alcohol or acetone in the tank. Our table-top units provide the ultrasonic power density of the largest industrial systems. Fully nitrogen inerted for fire protection. Designed for use in Class I Division 1 hazardous areas.
Using SOL XP with flammable solvents requires proper installation, ventilation, grounding, and EHS compliance. Improper setup can pose serious safety hazards. We strongly recommend calling us before installation to ensure your system is configured correctly and safely for your application.
Contact us for setup guidance →Electrical panel and generator are located outside the hazardous duty area. When this is not possible, an explosion-proof purged panel can be installed.
Nitrogen purged transducer enclosure and intrinsically safe circuits with interlocks contribute to safety compliance.
Containment pan for spills, cooling jacket to reduce solvent evaporation and extend ultrasonic run time, and solvent purification system.
Degreasing, refurb, and turnaround cleaning where flammable solvents are specified.
Parts requiring solvent cleaning before coating, bonding, or assembly.
MRO cells that need repeatable solvent cleaning with controls that satisfy safety audits.
Choose SOL XP when parts are too large for 1-liter beakers, solvent volumes are larger, throughput is higher, or your safety program requires explosion-proof certification.
Yes. The SOL XP is not a closed system and will release solvent vapor into the air. A suitable exhaust system is a necessity.
System includes electrostatic discharge (ESD) ground strap hookup. Periodically check ground straps for loose connections or breakage. Caution: ALWAYS CONNECT A WRIST STRAP TO THE GROUND PLUG BEFORE OPENING INNER LID AND PLACING PARTS IN THE MACHINE.
System has been approved for use with isopropyl alcohol (IPA), ethanol, and acetone.
We can provide installation guidance and a process checklist; contact us for application-specific SOL XP support.
Yes, specify Canadian NRTL certification when placing order.
Tell us your solvent system, contamination type, and process requirements. We'll confirm the right Sol XP configuration for your application.
